GENERAL
- Built 1980 Twin City Shipyard Inc.
- 1300 cu yd. Hopper
- Dimensions 197 x 41 x 16.5’
- Gross Tonnage 706
- Bottom Dump and Bow Discharge Capability
- Max effective dredging depth approximately 65’
- 25,000 gallons fuel
- 7500 gallons potable water
DOCUMENTATION
- Official Number 630005; IMO 7914248
- ABS International Load Line – Valid through September 2026. USCG Certificate of Inspection – Valid through January 2027
Main Engines:
- (2) Caterpillar D398 850HP (1700 hp.) driving 2 x Niigata ZP-D8 Z Drives. Main Engines and Rebuilt 2021 with 1154 & 1205 Hours.
Service Generators:
- (2) Caterpillar 3306 both Rebuilt 2021, now with 1588 and 1626 Hours.
Dredge Generator:
- Generator Caterpillar C27 with 14,500 Hours.
Dredge:
- 700 hp. Dredge Motor; 64” Suction Head; 22” Suction pipe; 20” Discharge pipe
Air Compressors:
- (2) Quincy 350L
Accommodations:
- Vessel has 15 beds, 9 on the first floor, 4 on the second floor and 2 on the third floor.
Location:
- Currently located Green Cove Springs, Florida.
GENERAL SPECIFICATIONS
- USCG OFFICIAL #630005
- Hull Number 552
- Date Keel Laid December 1980
- ABS ID 8011075
- IMO # 7914248
- Call Sign WDF6512
- Length 197’
- Breadth 40.8’
- Depth 16.5’
- Vert. Dist. Bottom Top of Mast 74.4’
- Light Draft Fwd. 5.3’
- Light Draft Aft. 8.7’
- Light Draft Avg. 7’
- Loaded Draft Avg. 14.6’
- Gross Tonnage 760.60 LT
- Lightship Displacement 919.13 LT
- Summer Free Displacement 2470 LT
- Summer Free DWT 1506 LT
- Number of Dragarms 1
- Max. Digging Depth @ 45 deg. 65’
- Avail. Pump HP 1 @ 700
- Pump RPM Dredging 290
- Pump RPM Pumping Out 360
- Pump Impeller Diameter 48”
- Jet Pump HP 180
- Suction Pipe I.D. 22”
- Discharge Pipe I.D. 20”
- Dredging Mark Tonnage 2850 LT
- Hopper Capacity 1300 CY
- Hopper Length 105’
- Hopper Width 22’
- Overflow Minimum 760 CY
- Pump Out Capacity Yes
- Max. Propulsion 2 @ 850
SPARES
- 1) Back door for the dredge pump
- (3) C27 generators in various states of repair
- (4) Keel coolers
- (1) GE 752 dredge pump motor
- (2) drag head HPU motors
- (2) dredge valve bonnets
- (2) rubber flex hoses for drag arm
- (2) jet water pump motors
- (1) complete Z drive with propeller
- (2) twin disk propulsion clutches
- Complete set of rubber hopper seal
- (1) hydraulic steering motor
- (1) Straatman bow connection
SURVEY EQUIPMENT
- (1) Ohmart VEGA Nuclear Density Gauge
- (2) VEGAPULS65 Ullage Sensors
- (2) Trimble SPS865 Receivers Installed
- (3) GPS Antennae & Cables Installed
- (4) Rosemount pressure/suction transmitters
- (1) HD25A Sensor Installed on Davit
- (1) Pitch/roll inclinometers (2) in shared housing
- (2) RPM Sensors
- (2) Hannay hose reels for ¼ – 3/8” hose.
- 1 – Main PLC – SLC500- (Power supply, CPU, scanner module, 2 analog input modules, 2 digital input modules) on an 8-card rack
- 1 – Remote PLC – SLC500- (Power supply, adapter module, 3 analog input modules)
PRICE ON REQUEST
